Looking for a MK4 MX5 Boot Rack ? We can help. Both the boot-bags and Revo-Rack range of boot racks will fit the MK4 MX5.
The Revo-Rack Range of Mk4 MX5 Boot Rack
The Revo-Rack comes in two finishes polished anodised (PA) & Black
Revo-Rack Black Model £349.95 / 369.95€
Revo-Rack PA Model £439.95 / 439.95€
The Revo-Rack manufactured by us in the UK is made from 25mm Aluminium & Magnesium tube and thus the frame only weighs 1.7kg The design of this rack allows it to fit in under 90 seconds, no bolts, no brackets, no straps and no paint damage. It will fit the MK4 MX5 perfectly it was developed for this car when we saw how small the panel gaps were on the 2015 MK4 MX5 we realised the odds of fitting a clamp based rack to the fragile aluminium boot lid edges without paint damage were very small.
Revo-Rack uses vacuum cup technology to secure to your MX5 .The rack sits on three 115mm vacuum cups these are rated as being able to hold an 18kg load each. These can in theory hold a 54kg load. Vacuum cups are not the same as suction cups they are much much stronger and were developed in the late 1960's to hold film camera's to cars !
Revo-Rack has been independently tested and certified by TUV Italy part of the global TUV testing and certification business. There is no ISO standard for convertible luggage racks so we had the Revo-Rack certified to ISO 11154 PAS 2006 : Road vehicles roof carriers. Revo-Rack passed and the lab and real world tests, in short it won't come off it fitted correctly.
Revo-Rack luggage rack for MX5 MK4/ND vacuum cup details
Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force.
Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching boot/trunk lid thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the boot/trunk lid, distortion is reduced, allowing the cup to be used with very little risk of damage.
Why a Revo-Rack for your MX5 ?
No metal clamps that chip and damage the fragile boot lid edges
Measures 900x 420mm
Sits 75mm off the boot lid
Can be fitted with the hoop at rear or front of boot lid
Certified to carry 20kg even on the MK4's aluminum boot lid; the load is spread over a far greater area than a conventional clamp based rack.
Supplied with storage bag and two luggage straps
Shipped with DHL in 48hrs
The boot-bag also fits the the MX5 MK4, and has been manufactured by our sister company boot-bag.com since 2008 with thousands sold worldwide. If you buy a MX5 boot rack you probably still need to purchase a waterproof luggage bag. Boot-bag does both jobs for half the cost of a rack alone with zero risk of any paint damage. The straps simply loop around your Mazda's boot lid negating the need for a rack.
Why boot-bag for the MK4 MX5 ?
Fully Waterproof
Fits all models since 2002
Attaches using soft webbing so no damage to paint
Sits on a soft non slip mat
14 day no quibble money back guarantee.
Folds flat for easy storage, can be removed in minutes and stored inside if you stop.
Saves Money ; half the price of a rack and waterproof holdall/suitcase
25,000 sold since 2008
Hand made by us in the UK = Good quality that will last for years
Shipped in 48hrs with DHL
There are two sizes in the boot-bag range :
boot-bag original - £124.95 / 144.95€ - 50 Litres of additional luggage capacity measures 70x36x20cm ( 28"x15"x8") giving 50 litres (1.75 cubic feet) of additional storage. The soft non slip mat the bag sits on is slightly bigger measuring 80x40cm.
boot-bag vacation - £154.95 / 179.95€ - 75 Litres of additional luggage capacity, 50% larger than the boot-bag original measuring 90x40x20cm. The soft mat measures 90x45cm
