{"id":506,"date":"2019-11-27T15:17:34","date_gmt":"2019-11-27T15:17:34","guid":{"rendered":"http:\/\/carbootracks.co.uk\/2\/?page_id=506"},"modified":"2026-01-19T15:19:38","modified_gmt":"2026-01-19T15:19:38","slug":"mx5-mk4-boot-rack-2","status":"publish","type":"page","link":"https:\/\/carbootracks.co.uk\/2\/convertible-boot-rack\/mazda-mx5-boot-rack\/mx5-mk4-boot-rack-2\/","title":{"rendered":"MK4 MX5 Boot Rack"},"content":{"rendered":"

Looking for a MK4 MX5 Boot Rack ? We can help. Both the boot-bags and Revo-Rack range of boot racks will fit the MK4 MX5.<\/p>\n

The Revo-Rack Range of Mk4 MX5 Boot Rack<\/span><\/p>\n

The Revo-Rack comes in two finishes polished anodised (PA) & Black<\/p>\n

Revo-Rack Black Model \u00a3349.95<\/strong> \/ 369.95\u20ac<\/p>\n

Revo-Rack PA Model \u00a3439.95<\/strong> \/ 439.95\u20ac<\/p>\n

The Revo-Rack manufactured by us in the UK is made from 25mm Aluminium & Magnesium tube and thus the frame only weighs 1.7kg The design of this rack allows it to fit in under 90 seconds, no bolts, no brackets, no straps and no paint damage. It will fit the MK4 MX5 perfectly it was developed for this car when we saw how small the panel gaps were on the 2015 MK4 MX5 we realised the odds of fitting a clamp based rack to the fragile aluminium boot lid edges without paint damage were very small.<\/p>\n

Revo-Rack uses vacuum cup technology to secure to your MX5 .The rack sits on three 115mm vacuum cups these are rated as being able to hold an 18kg load each. These can in theory hold a 54kg load. Vacuum cups are not the same as suction cups they are much much stronger and were developed in the late 1960's to hold film camera's to cars !<\/p>\n

Revo-Rack has been independently tested and certified by TUV Italy part of the global TUV testing and certification business. There is no ISO standard for convertible luggage racks so we had the Revo-Rack certified to ISO 11154 PAS 2006 : Road vehicles roof carriers. Revo-Rack passed and the lab and real world tests, in short it won't come off it fitted correctly.<\/p>\n

 <\/p>\n

Revo-Rack luggage rack for MX5 MK4\/ND\u00a0vacuum cup details<\/h5>\n

Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force.<\/p>\n

Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching boot\/trunk lid thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the boot\/trunk lid, distortion is reduced, allowing the cup to be used with very little risk of damage.<\/p>\n

Why a Revo-Rack for your MX5 ?<\/h5>\n

No metal clamps that chip and damage the fragile boot lid edges<\/p>\n

Measures 900x 420mm<\/p>\n

Sits 75mm off the boot lid<\/p>\n

Can be fitted with the hoop at rear or front of boot lid<\/p>\n

Certified to carry 20kg even on the MK4's aluminum boot lid;\u00a0 the load is spread over a far greater area than a conventional clamp based rack.<\/p>\n

Supplied with storage bag and two luggage straps<\/p>\n

Shipped with DHL in 48hrs<\/p>\n

 <\/p>\n

 <\/p>\n

\"close
High quality manufacture, vacuum cup is closed and secured red line no longer visible.<\/figcaption><\/figure><\/p>\n

\"close
Unlike metal clamps soft rubber cannot chip dent or mark paintwork<\/figcaption><\/figure><\/p>\n

\"blue
It never ceases to amaze us what people carry on their Revo-Racks !<\/figcaption><\/figure><\/p>\n

 <\/p>\n

\"\"<\/a> \"\"<\/a><\/p>\n<\/div><\/div><\/div>

\"red
We have been selling Revo-Racks since late 2015 here is Pauls MK4 on his epic 3000 mile trip of Europe here in Corsica.<\/figcaption><\/figure><\/p>\n

\"side
Revo-Rack was designed for the MK4's boot lid its the biggest rack out there and covers 90% of the boot lid.<\/figcaption><\/figure><\/p>\n

\"blue
Revo-Rack PA is hand polished and anodised for a deep shine thats similar to stainless steel but with the lightweight properties of aluminium<\/figcaption><\/figure><\/p>\n

\"red
Tested by our customers since 2016 :<\/strong> I can carry a 19 kg bass sax + case on the back of my ND because of this rack. Who says you need a larger car?<\/em> William Japan 6.2.23<\/figcaption><\/figure><\/p>\n

\"black
Fitted and secured in 90 seconds no awkward metal clamps on boot edges that chip paint<\/figcaption><\/figure><\/p>\n

\"white
Independently certified and tested t0 carry 20kg<\/figcaption><\/figure><\/p>\n

\"red
Revo-Rack's can be used in all temperatures and don't just carry bags.<\/figcaption><\/figure><\/p>\n

\"mx5
The panel gap on the Mk4 is 2.7mm. Please don't risk dents and chips with an inferior design of luggage rack : there is not room for a metal clamp.<\/figcaption><\/figure><\/p>\n

\"revo-rack
Independently certified to ISO 11154 PAS 2006 The only luggage rack in the world to have been tested to this extent.<\/figcaption><\/figure><\/p>\n<\/div><\/div><\/div><\/div>

 <\/p>\n